aerosol machine, Aerosol Machine, AEROSOL MACHINE, aerosol machine, Aerosol Machine, KLEEN MIST, KLEEN MACHINE, AEROSOL DISPENSER, METERED SPRAYER, DEODORIZER, Mist Machine, Kleen Air Dispenser AEROSOL DISPENSER
![]()
PRODUCT NAME: Aerosol Dispenser. PRODUCT DESCRIPTION: These devices are all battery operated and have different controls and different setups. Look through the detailed listing of these controls listed below to determine which model will best suit your needs. The unit on the left in the picture above comes in two designs and runs on two "D" Cell batteries. The unit in the right of the picture comes in one design and runs on two "D" batteries. All of these machines can be used to apply either a scent based aerosol, an odor eliminating aerosol or an insecticide. The Model 1000 is the basic unit which is good for most applications where all you want is for the aerosol to be released in a consistent pattern. The Model 3000 allows you the most settings. It is clearly the most "configurable" model and can be set to skip certain days or go off as often as once a minute. The Model 2000 is in between the other two and probably the easiest to use that offers a wide range of settings. It's the only one that uses a photo sensor which gives it the unique ability to monitor light which is then used to control it's functions but it does not have nearly as much control over time guidelines like the the Model 3000. MODEL 1000: This device is battery operated and dispenses an aerosol blast designed to either eliminate odors, help control insect infestations or release fresh smelling aromas. It has several features including a green light/red light indicator used to let you know the unit is on or that the batteries need replacement. It runs on 2 "D" cell batteries which should last several months. This unit features one switch which turns the unit on or off. When on, it will release a blast of aerosol every 15 minutes. This setting is not adjustable. MODEL 3000: This model looks exactly the same as the Model 1000 but it has an extensive list of programming options and configurations. It can be set to release aerosol based on minute increments. In other words, you could have it release a blast every minute, every other minute, every 5 minutes, every 13 minutes, etc. You can also set it to go off every 60 minutes if minimal product release is adequate. Once an hour is the least frequent setting available; once a minute would be the most frequent setting available. This unit can also be configured to release aerosol on either a 5 day or 7 day cycle. The 5 day cycle includes active days of Monday through Friday. During this cycle the unit will not release aerosol on either Saturday or Sunday. The 7 day cycle means the unit will release aerosol every day, Monday through Sunday, on the same time schedule hour by hour. This unit gives you the most control over how much material is being applied and when it's released. MODEL 2000: This model is on the right side of the picture above and looks a lot like the Model 1000 and Model 3000. However, it has a small photosensor just below the light on the front panel. It also has different adjustments making it unique. This unit features two buttons. The red one is for turning the unit on or off. The blue one is for determining when the unit should release aerosol. Like the Model 1000, you have three choices. The time between releases are 5, 15 or 30 minute intervals which is slightly different then Model 1000. This same button also controls how you want to utilize the photosensor. When left in "red" mode, the unit will release a blast of aerosol around the clock, working continuously. When in the "green" mode, the unit will release aerosol only when light is present. For rooms where the lights are on and off during any 24 hour period, this can be a very effective way to control product releases. This unit runs off two "D" cells like the two machines described above. Here is a short video showing how to set up our Model 2000 right out of the box.
TARGET PESTS: Although most applications are for odor masking, you can get a pyrethrin aerosol can which is used for fly and other insect control. WHERE TO USE IT: Most commonly used in rest rooms, this machine can be used on decks outside, basements, crawl spaces and just about anywhere in the home. PACKAGING AND COST: The Model 1000 (ITEM # 283155)The Model 2000 (ITEM # 283157)
The Model 3000 (ITEM # 283158)
Purchase any combination of three to five units and get 10% off; 6 or more purchased at one time qualify for case pricing of 20% total list price! ** HERE IS AN ONLINE ORDERING TIP - DON'T START SHOPPING TILL AFTER YOU HAVE READ ALL OUR INFORMATION. WHILE LOOKING AT PRODUCT PAGES LIKE THIS ONE, WRITE DOWN ITEM #'S FOR ANYTHING YOU WANT TO PURCHASE. KEEP THIS LIST PRESENT FOR WHEN YOU ARE READY TO PURCHASE. KNOWLEDGE OF ITEM #'S, ALSO KNOWN AS "SKU'S", WILL MAKE ORDERING EASY. THEY ALSO INSURE YOU GET WHAT YOU WANT SO MAKE A LIST BEFORE YOU START SHOPPING ** FOLLOW THE LINK BELOW TO RETURN TO OUR ON LINE ARTICLE. BE SURE TO REVIEW ALL ITEMS LISTED IN THE ARTICLE TO INSURE YOU GET THE RIGHT MATERIAL FOR YOUR PARTICULAR SITUATION. IF YOU ALREADY KNOW WHAT YOU WANT TO ORDER, CLICK THE "SHOPPING CART LINK" TO BEGIN THE ORDERING PROCESS. REMEMBER THAT ON LINE ORDERS GET 5% OFF SO USING OUR CART IS WORTH YOUR TIME!!
CLICK HERE TO GO BACK TO ARTICLE CLICK HERE TO "START SHOPPING" CLICK HERE TO GO BACK TO PRODUCT SELECTION PAGE CLICK HERE TO GO TO MAIN PAGE E-Mail support@bugspray.com
url: http://www.bugspray.com/catalog/products/page196a.html